Product
Low Profile Rounded Headboard Upholstered Bed | HM-LB-2613
Low Profile Rounded Headboard Upholstered Bed (HM-LB-2613) is the answer to a room with a sloping ceiling or a window at the bed head. The headboard stops at 93 cm — below a standard windowsill — and every corner of it is rounded rather than square-cut, so from the side the bed reads as one soft line. Grey linen-look, 23 cm rails, 10 cm legs, nothing else.

1. Product Overview
Zehao manufactures metal and upholstered beds in Tianjin and ships container loads to Australia, New Zealand, the Middle East, Europe, Southeast Asia, Africa and the Pacific. HM-LB-2613 sits in our upholstered single & queen bed range. It is specified for loft conversions, attic rooms, low-ceiling apartments, guest bedrooms under a window, and hotel rooms with a fixed bedhead panel.
Low headboards exist for a reason and it is almost always architectural: a 110 cm panel in front of a window blocks light, and in a loft it hits the slope. At 93 cm this bed sits under both. It also keeps the sightline open in small rooms, which is why interior designers use it in compact schemes. Packing runs 0.3246 to 0.4013 CBM, 209 double beds per 40HQ.
2. Key Features
- 93 cm headboard. Low enough to sit under a standard 90–100 cm windowsill and under a loft slope, so the bed can go where a full-height panel cannot.
- Rounded corners. Every corner of the headboard is radiused and foam-wrapped, with no square edge at hip or knee height.
- 23 cm rails and 23 cm footboard. A low, deep-looking platform line with a 6 cm footboard that hides the mattress edge.
- Grey linen-look upholstery. Stone grey as standard; oatmeal, charcoal, sand, sage and navy from stock. Velvet and boucle alternate; COM accepted.
- 63 × 12 mm slat deck. Beech slats on a centre rail, sized for a 20–30 cm mattress; no box spring.
- 10 cm legs. Tapered timber, stained to match or in matte black; enough clearance for a robot vacuum.
- Three sizes. 137 × 187, 153 × 203 and 183 × 203 cm.

3. Specifications
| Product name | Low Profile Rounded Headboard Upholstered Bed (HM-LB-2613) |
| Model | HM-LB-2613 |
| Type | Low profile upholstered bed, rounded headboard |
| Upholstery | Linen-look polyester (stone grey standard); velvet, boucle, chenille or COM on request |
| Headboard | 93 cm high × 7 cm thick, radiused corners |
| Footboard | 23 cm high × 6 cm thick |
| Side rails | 23 cm high × 4 cm thick |
| Support base | 63 × 12 mm beech slats on a centre rail; no box spring |
| Legs | Tapered timber, 10 cm high, stained or matte black |
| Sizes (mattress) | Double 137 × 187 · Queen 153 × 203 · King 183 × 203 cm |
| Custom sizes | Widths 90–200 cm, lengths 190 / 200 / 203 cm; headboard height 80–120 cm |
| Packing | 2 cartons per set (headboard / rails, deck & legs) |
| Structure | Plywood and MDF panels on a timber frame; bolt-on rails |
| Load capacity | SGS static load test report supplied with the quotation for the ordered size |
| Mattress | Not included; 20–30 cm depth recommended |
| Certifications | ISO 9001 factory; SGS load reports; FR foam and cover to BS 5852 / CAL 117 on request |
| Service | OEM/ODM: headboard height, corner radius, leg finish, fabric, size, logo label and carton printing |
4. Applications & Where It Sells
Loft conversions and attic rooms are the reason this model exists: a 110 cm headboard physically will not fit under a 1.4 m slope, and a 93 cm one will. Guest bedrooms where the bed must sit under a window use it for the same reason, and low-ceiling apartments use it so the room does not feel capped.
It also fits hotel rooms that already have a fabric bedhead panel on the wall — the low headboard sits below it instead of fighting it — and compact urban apartments where a tall panel would make a 10 m² bedroom feel closed. For importers it is the neutral low-profile SKU that complements the taller statement beds.
5. Customization: What We Change For You
Headboard height is the single variable that decides whether this bed fits a room. It is a cutting instruction here, not a new product:
- Headboard height. 80, 93 or 110 cm from the same tooling; a 70 cm version is used where the bed sits directly under a window.
- Corner radius. Fully rounded as shown, or a 3 cm radius for a squarer, more architectural read.
- Legs and finish. Tapered timber stained to match a bedside, matte black steel, or a 5 cm plinth for a built-in look.
- Fabric and size. Any fabric in our library matched to a Pantone or swatch; 90–200 cm widths cut to order.
- Branding and compliance. Label, branded hardware bag, retail carton printing, barcode; FR foam and cover to BS 5852 or CAL 117.
6. Why Buy From Zehao
Everything on this page is made in our own plant in Tianjin: the timber frame is cut and drilled here, the foam is cut and glued here, the covers are sewn and fitted here, and the cartons are packed here. That is why a non-standard width, a colour match to your swatch, or a mixed container of three sizes is a production note rather than a negotiation. ISO 9001 quality system, SGS static load reports for the ordered size, and a pre-shipment inspection you can attend or delegate to a third party.
7. Ordering, Packing & Shipping
| Minimum order quantity | 50 sets per model; mixed models and sizes accepted in one container |
| Payment terms | T/T 30% deposit, 70% before shipment; L/C at sight negotiable |
| Lead time | 25–35 days after deposit and fabric confirmation; 40–45 days for custom headboard heights or COM |
| Loading, 40HQ | 137 × 187 cm: approx. 209 sets (0.3246 CBM/set) · 153 × 203 cm: approx. 192 sets (0.3539 CBM/set) · 183 × 203 cm: approx. 169 sets (0.4013 CBM/set) |
| Packing | 2 cartons per set; loading plan with carton dimensions and weights issued with the quotation |
| Sample | One set for evaluation, charged at sample price and refundable against a container order |
| Incoterms | FOB Xingang / CIF / DDP available |
| After-sales | Spare legs, hardware, slats and upholstery panels supplied for the life of the project |
Factory-direct pricing for wholesalers, distributors and project buyers. Custom sizes, fabrics, colours and OEM/ODM supported. Contact: WhatsApp +86 155 1090 8182 · zehao@cntjzh.com
8. Buyer FAQ
What is the MOQ?
50 sets per model. Mixed models and sizes can share a container as long as each reaches 50 sets.
Will a 93 cm headboard work with a 30 cm mattress?
Yes. The mattress top sits around 55–60 cm from the floor, leaving roughly 35 cm of headboard above it — enough to lean on, low enough to clear a windowsill.
Can the headboard be taller?
Yes, 110 cm from the same tooling, and 120 cm with a different panel. 80 and 70 cm are also standard cuts for low windows and loft slopes.
Are the corners soft enough for a child's room?
The corners are radiused and foam-wrapped with no square edge, which is why this model is also used in kids and guest rooms. It is not a certified child-safety product; if you need EN 747 or a specific children's furniture standard, tell us at enquiry.
Do the legs come off for shipping?
Yes. They unbolt and pack with the hardware in the rail carton.
How many fit in a 40HQ?
Approx. 209 in 137 × 187, 192 in 153 × 203 and 169 in 183 × 203, based on standard packing.
Related Products
- HM-LB-2609 tapered wood leg upholstered platform bed
- HM-LB-2603 linen upholstered bed with turned wood posts
- HM-LB-2607 low platform upholstered bed base with metal corner guards
- Browse the full upholstered single & queen bed range
Low Profile Rounded Headboard Upholstered Bed | HM-LB-2613
Zehao | SKU: HM-LB-2613 | Low profile upholstered bed with a 93 cm rounded headboard, 23 cm rails and tapered timber legs. Double 137, queen 153 and king 183 cm. Beech slat deck, no box spring. Custom headboard height, corner radius, fabric and size for loft, attic and guest room projects.



