Channel Panel Upholstered Bed With Footboard Drawers | HM-LB-2605

Channel Panel Upholstered Bed With Footboard Drawers (HM-LB-2605) is the only bed in this range with the storage at the foot rather than the side. Two drawers sit inside a 29 cm upholstered footboard, flush-fronted in the same fabric, and the headboard is a 120 cm vertical channel panel. The same fabric and the same channel pitch carry onto a bedside, a tallboy and a blanket box, so a hotel room can be furnished from one specification.

1. Product Overview

Zehao manufactures metal and upholstered beds in Tianjin and ships container loads to Australia, New Zealand, the Middle East, Europe, Southeast Asia, Africa and the Pacific. HM-LB-2605 sits in our upholstered single & queen bed range and is built for hotel guest rooms, serviced apartments, student and staff quarters, and residential bedrooms where a wardrobe wall is not available.

Footboard drawers are the practical answer to a room where the bed head is against the wall: the drawers open into the walkway instead of into the wall. Drawer boxes are plywood on steel runners with an upholstered front, and the set loads at 0.5000 to 0.6300 CBM per bed, 136 double beds in a 40HQ, with the casegoods quoted as separate lines.

2. Key Features

• Two footboard drawers. Flush upholstered fronts inside the 29 cm footboard, plywood boxes on steel runners, opening into the room rather than into the wall.
• Vertical channel headboard. 120 cm high, 9 cm thick, channels running floor to top with a piped seam between each — the detail that reads as a hotel headboard.
• Matching casegoods. Bedside 53 × 44 × 67 cm, tallboy 88 × 50 × 104 cm and blanket box 133 × 42.5 × 43.5 cm, upholstered in the same fabric with the same channel pitch.
• 29 cm rails and footboard. Deep enough to hide the drawer line and to hold a 30 cm mattress, with a 5 cm leg giving the frame a shadow gap off the floor.
• One fabric across the set. Bed, bedside, tallboy and box are cut from the same dye lot, so a room photographed six months apart still matches.
• Timber slat deck. Poplar slats on a steel centre rail; no box spring.
• Container-friendly set packing. Bed in 4 cartons, casegoods cartoned separately so a buyer can mix bed-only and full-set containers.

3. Specifications

4. Applications & Where It Sells

This is a project bed. Hotel guest rooms use the footboard drawers in place of a luggage bench, student and staff accommodation uses them in place of a chest of drawers, and serviced apartments use the full four-piece set to furnish a studio from one purchase order. The drawers also solve the wall-side problem: with the head against the wall, side drawers are unreachable, footboard drawers are not.

For retail it sells as a bedroom package rather than a single item — bed, two bedsides, tallboy and blanket box in one fabric — which raises the average order value and makes the container loading simpler because the casegoods fill the gaps around the bed cartons.

5. Customization: What We Change For You

Set work is where a factory either helps or gets in the way. Everything here — bed, bedside, tallboy, box — comes off our own lines, so the set is specified once:

• Set composition. Bed only, bed plus two bedsides, or the full five-piece room pack. Casegoods can be built to your drawing rather than ours.
• Drawer layout. Two footboard drawers as standard; one wide drawer, three drawers, or a lift-up ottoman instead. Side drawers available for beds that stand free.
• Fabric and channel pitch. Channel width from 8 to 16 cm, and one fabric across the whole set from a single dye lot.
• Size to your mattress. 190, 200 and 203 cm lengths standard; 90–200 cm widths cut to order.
• Branding and compliance. Woven or printed label on every piece, branded hardware bag, retail carton printing; FR foam and cover to BS 5852 or CAL 117 with third-party reports.

6. Why Buy From Zehao

We ship beds, not samples of beds. Ten years of container loading for hotel groups, student accommodation operators and importers means the packing plan, the carton marks and the hardware bags are already built around how a 40HQ is actually filled and unloaded. The factory is ISO 9001 certified, metal parts are SGS tested to 200 kg, and every order leaves with a loading photo set and a packing list that matches the cartons on the floor.

7. Ordering, Packing & Shipping

Factory-direct pricing for wholesalers, distributors and project buyers. Custom sizes, fabrics, colours and OEM/ODM supported. Contact: WhatsApp +86 155 1090 8182 · zehao@cntjzh.com

8. Buyer FAQ

What is the MOQ?

50 bed sets per model, 50 pieces per casegood item. Bed and casegoods can share one container.

How much do the footboard drawers hold?

Each drawer is a plywood box roughly 60 × 40 × 18 cm on steel runners. Bedding, shoes, towels and folded linen are the intended use; drawer dimensions are confirmed per bed size with the quotation.

Do the drawers open if the bed is against a wall?

Yes — that is the point of putting them in the footboard. They open into the walkway at the end of the bed, so the bed head can sit flush against the wall.

Is the mattress included?

No. The bed is supplied as a frame with slat deck, sized for a 20–30 cm mattress.

Can I buy the bed without the casegoods?

Yes. The bed is a stand-alone SKU; the bedside, tallboy and blanket box are separate line items.

Will the fabric match across pieces ordered later?

Within one order, yes — all pieces are cut from one dye lot. For a repeat order, send the original order number and we will match to the retained sample; a small shade variance is normal in textile production and is stated on the quotation.

How many beds fit in a 40HQ?

Approx. 136 in 137 × 190, 123 in 150 × 180 and 107 in 180 × 200. Casegoods load in the remaining space; the mixed plan is issued with the quotation.

Related Products

• HM-LB-2595 channel-tufted upholstered bed with two storage drawers
• HM-LB-2611 gas lift storage upholstered bed with fluted panels
• MSB-615-2 lift-up storage upholstered queen bed
• Browse the full upholstered single & queen bed range